Just put together one in a smaller box, now means it can sit on top of the 7000 without obstructing the fan.
Smaller display, and only one antenna connection, and a "less work" front panel.
Another tuner
Another tuner
G 3 E J S
Re: Another tuner
I do like those boxes you have been using, where do you get them from?
One comment, if you set cell 07 in the settings to zero, it will get rid of those odd bits of lines at the bottom of the display (you can probably set 08 to zero as well, I did in mine).
One comment, if you set cell 07 in the settings to zero, it will get rid of those odd bits of lines at the bottom of the display (you can probably set 08 to zero as well, I did in mine).
Terry VK5TM
https://www.vk5tm.com/
https://www.vk5tm.com/
Re: Another tuner
Both the boxes came off ebay, really hard to find anything the right size.
This one I had to cut about 1" of the end, as it was longer than I wanted.
Yes, I have not made all the settings I want, yesterday I turned the soldering iron off as I put the last screw in, as I had other things that had to be done
I want to disable the line loss calibration as well, fine tune the delay and while I have the front panel off, I want to spray the screw heads black.
This one I had to cut about 1" of the end, as it was longer than I wanted.
Yes, I have not made all the settings I want, yesterday I turned the soldering iron off as I put the last screw in, as I had other things that had to be done
I want to disable the line loss calibration as well, fine tune the delay and while I have the front panel off, I want to spray the screw heads black.
G 3 E J S